PCB inspection
Drilling alignment check_X-3000
Drilling alignment check_X-3000
Light pipe type:Closed Stage:1000*800mm Function application:PCB drilling alignment inspection Feeding method:Manual sample feed

X-3000 is mainly used for PCB board drilling alignment check. Its high gain, high sensitivity, high spatial resolution, and short response time are well received by customers.

X-Ray tube typeClosed
Spatial resolutiaon52lp/mm
Light tube voltage50KV
Light tube current1000uA
Magnification15-30 Times
Largest windowΦ25mm
Detection area1000mm*800mm
Maximum PCB width1050mm
way to controlManual feeding plate
Focus size100um
Output screen brightness30cd/cm2
Image speed60 FPS/S
Maximum spacing280mm
Machine size1514*838*1050mm (L*W*H)
Machine weight360KG
operating systemWINDOWS 7/WINDOWS 10
Power supply/powerAC110-220V  50-60HZ 1200W
Radiation safety test<1 uSV/H
XC-3100 is a new type of X-ray spotting machine, used to quickly count the reel materials in the SMT industry, with an accuracy of 99.99% and a four-reel inspection speed of only 7-14S.
X-7100 X-RAY has a wide range of inspection fields and is usually used in the internal structure inspection of electronic components. Common bubble void rate measurement, circuit short circuit and open circuit, solder joint lack of solder, less solder leakage, and foreign body cracks inside.....
X-9200's large-size stage (1700*1000mm) can accommodate a variety of large-size samples for X-RAY testing. Its feature of being suitable for large-volume automatic testing is deeply loved by customers and is widely used in LED hard light bar testing.