HAMAMATSU L 9631X－RAY 光管在电池检测的应用
Hamamatsu L 9631微聚焦X射线源具有40~110 kV密封结构的x射线管，最小x射线焦点尺寸为15μm，最大输出功率为50W，光束角度为62°。微聚焦X射线SOURCE是专门为X射线无损检测而开发的.一个小的焦点可以防止X射线图像的模糊，并提供一个锐利的放大图像.提供了一个RS-232C接口作为stan。用于外部控制。即使在三维观测期间，这些微聚焦X射线源也能产生清晰、锐利的放大X射线图像.
Manufacturer's Warranty: The manufacturer warrants its products to be free of detects in materials and workmanship for the stated period from date of original purchase invoice. All warranties or merchant ability and fitness for any purpose and all other warranties, expressed or implied, except those expressly set forth herein, are deemed waived and excluded. Manufacturer's duty under the warranty is limited to replacement and/or repair of the defective part at their exclusive option. Seller shall not be liable for any expenses or damages incurred by the purchaser except as expressly set forth herein, and in no event shall seller or manufacturer be liable for any special, incidental or consequential damages of any kind. This warranty does not supersede any statutory rights that may be available in certain countries. The foregoing manufacturer's warranty of shall be voided, and of no force and effect if buyer has modified or damaged the product.
Hamamatsu L9631 Microfocus X-ray Source has has a 40-110KV sealed configuration x-ray tube with 15μm minimum x-ray focal spot size, 50W maximum output and a 62 degree beam angle. Microfocus X-ray sources are specifically developed for X-ray nondestructive inspection. A small focal point prevents blurring of X-ray images and delivers a sharp enlarged image. An RS-232C interface is provided as standard for external control. These microfocus X-ray sources also yield clear, sharp enlarged X-ray images even during 3D observation.
Non-destructive Inspection System
X-ray CT System
In-line X-ray Inspection System
It allows continuous maximum output 800 μA (50 W),
Fully operable from external PC,
1 package of sealed type X-ray tube, high-voltage power supply and control function,
10 to 200 μA (8 W Max.) Tube current operational range.